DTEN Mate Gen 2
Run the meeting.
Capture the room.
The controller that stays current with the room.
The DTEN Mate Gen 2 is the second-generation table controller for DTEN workspace solutions, running Microsoft Teams and Zoom from one familiar interface.
A full 11.6-inch touch console runs the meeting and an onboard microphone array captures the room.
Works with
One controller across the DTEN line.
The Mate Gen 2 is the common table controller across DTEN workspace solutions. It runs as part of the system it serves, so a growing deployment standardizes on one controller with one interface for people to learn and one system for IT to support.
Coming soon: Support for the DTEN D7X AI BoardControl and Capture
Run the meeting from the table.
A full touch console on the table runs the meeting and captures the room, from smaller spaces to larger ones.
Covers larger rooms
A six-microphone array inside the console picks up the table directly, extending reach so larger rooms are covered without a separate table microphone.
Everything within reach
An 11.6-inch touch console puts join, mute, share, and camera control at hand in the Microsoft Teams or Zoom interface people already know.
Holds a comfortable angle
A built-in hinge tilts the display from 15 to 60 degrees and stays where it is set, so anyone at the table can see and reach the screen without a separate stand.
Brings your own device into the room
One USB-C connection runs your own platform through the room's cameras, microphones, and speakers, shares content over the wire, and charges the laptop from the included power supply.
Certified to Stay
Current as long as the room is.
The console attaches to the room system and runs as part of it, so it needs no certification of its own. It stays current on the system's cycle, with nothing separate to recertify.
-
No certification of its own
Runs as part of the room system, with nothing separate to certify or recertify.
-
Stays current on the system's cycle
As the room system recertifies, the console stays current automatically.
-
No operating system to maintain
No onboard OS. Compute comes from the room system.
-
Signs in once
The room signs in once, not once for the room and again for the console.
Wired for Reliability
The meeting rests on the room,
not the network.
A direct wired connection to the host keeps the meeting resting on the room, not on the network between the controller and the host.
A direct wired link to the room
The controller connects point to point to the host, so the connection between console and room does not pass through a network switch or depend on IP configuration.
The meeting rests on the host, not the network
With the control link off the network, the meeting is not exposed to packet loss between the controller and the room.
Powered over the same run
The controller is powered over PoE on the same connection. There is no PoE switch or injector in the path.
The same setup in every room
One wired run from host to table, repeated identically in each room, with no per-room network design or addressing to work out.
The complete room system
For larger rooms that need more coverage.
The DTEN room system extends across the entire space, so every seat is seen, every voice is heard, and the meeting runs from the table.
DTEN workspace solutions
The host at the front of the room. The Mate Gen 2 runs as part of it, drawing its compute from the system.
Vue Pro Cameras and Relay Speakers
Vue Pro satellite cameras extend the host's AI across the space, bringing per-face framing, depth, and exposure to every seat. Relay Speakers extend audio wirelessly so everyone is heard clearly, front to back.
DTEN Orbit Pro
Rooms that just work.
DTEN Orbit Pro keeps the rooms you invested in working when your business needs them.
PREVENT
Prevent meeting failures
Proactive monitoring catches firmware drift, configuration changes, and connectivity issues before they disrupt a meeting. When something does go wrong, a contractual 15-minute first response reaches a DTEN engineer, 4 to 6 times faster than Orbit Basic.
SCALE
Scale your AV operations
A single console manages every device in every location. Bulk actions and standardized profiles let a growing deployment stay manageable with the team you already have.
PROTECT
Protect your investment
Three-year hardware coverage matches your refresh cycle, with continuous updates and advance parts replacement that ships before the failed unit returns.
A closer look
DTEN Mate Gen 2
Select a feature to explore the hardware.
11.6-inch touch display
1920×1080 at 60 Hz, 300 nits, capacitive multi-touch. Join, mute, share, and camera control at the table in the Microsoft Teams or Zoom interface people already know.
Built-in hinge
Tilts the display from 15 to 60 degrees and stays where it is set, so anyone at the table can see and reach the screen without a separate stand.
Six-microphone array
Built into the console on the table, working alongside the host array so the room is covered from two positions. No separate table microphone to source, cable, or install.
USB-C at the table
One connection runs your own platform through the room's cameras, microphones, and speakers, shares content, and charges the laptop up to 65 W from the included power supply.
Wired connection and power
A single category cable runs point to point from the host to the table. The console draws power over PoE 802.3af, with no switch or injector in the path.
Add the Mate Gen 2 to your rooms.
Run the meeting. Capture the room.